Important Safety Precautions; Directions For Use; Troubleshooting Guide; Specifications - PALSON Ideal Gebrauchsanleitung

GB
Our products are developed to meet the highest quality, performance and design standards. We hope you enjoy your
new PALSON Ideal bathroom scales.

IMPORTANT SAFETY PRECAUTIONS

When using electrical appliances, certain basic safety precautions must be followed, including the following:
- In order to ensure correct operation, please read these instructions carefully.
- This product must not be used by children or by other people without assistance or supervision if their physical,
sensory or mental condition limits safe use of the appliance. Children must be watched to make sure that they do
not play with the appliance.
- These scales are a precision electronic instrument. One of the most difficult things to weigh is the human body
because it is constantly moving. In order to ensure reliable readings, try to put your feet always in the same place
on the scales and remain still.
- Treat the scales with care. Never drop or jump on them. Our scales are designed for a long life, but incorrect use
or handling may cause malfunctions of the electronic sensors.
- Never immerse the scales in water. To clean the surface, use a damp cloth or a window cleaner.
- Do not open or disassemble the scales or its components.

DIRECTIONS FOR USE

1. Open the lid of the battery compartment on the rear of the scales.
2. If there are already batteries in the compartment, remove the insulation. Otherwise, place 2 CR2450 lithium
batteries in the battery compartment and then close the lid. (Fig. 1)
3 Select the desired measuring unit between kg/lb/st. (Fig. 2)
4. Place the scales on a hard, flat floor.
5. If a number other than 0.0 kg is displayed, wait about 20 seconds until it turns off automatically. If the display
remains blank, ignore the next step.
6. Press on the scales firmly with your foot until "8888" is displayed. (Fig. 3)
7. Important note. Wait until «0.0» is displayed before standing on the scales. (Fig. 4)
8. Stand on the scales (the display will blink) and remain still. The weight measured will be displayed. (Fig. 5)
9. Step off the scales and when "0.0" appears, you can weigh again.
Note: The scales will turn off automatically after "0.0" has been displayed for 10 seconds with nobody standing on
them.

TROUBLESHOOTING GUIDE

If any problems occur with use of the scales:
1. Check that the batteries are inserted correctly.
2. Check that the correct unit has been selected: kg/lb/st.
3. Check that the scales are placed on a flat, level floor and are not touching against any wall.
4. Do not stand on the scales until "0.0 kg" is displayed.
5. If the display remains blank or "LO" is displayed when you press on the scales to turn them on, try inserting new
batteries. (Fig. 6)
6. If "0_Ld" is displayed, the scales have been overloaded. (Fig. 7)

SPECIFICATIONS

Weighing range: Min. 2 kg / Max. 150 kg. Graduation: 0.1 kg
Thank you for choosing one of our products.
Downloaded from www.Manualslib.com manuals search engine
5