Werbung
26951_Manual_a_Print
21.08.2009
A
C
D
Downloaded from
www.Manualslib.com
12:43 Uhr
Seite 5
WM 2210 / 26951
B
manuals search engine
WM 2210 / WM 4020 Assembly instructions
Wall mount for TFT and LCD monitors with a diameter 10-22" (25-56cm)/10-40" (25-102cm).
Congratulations!
You have made a good decision by purchasing a Vivanco wall mounting.
Please keep these instructions for later use.
The products are designed to be used in private homes.
Correct assembly is essential for a long life and functionality of your wall mount.
Please observe the following points carefully:
Notes on safety:
• Maximum load bearing 10/20 kg.
• The mount is only applicable for fixing to the wall.
• Before attaching the mount check it thoroughly for any damage.
• Never use defective parts.
Notes on assembly:
• Before assembling: check the location of the closest socket.
• As the max. load bearing depends in part on the material and condition of the wall, no fixing materials have
been included for safety reasons. These must be chosen according to the type of wall. Therefore, you
should ask a specialist which fixing materials to use, giving the relevant details (material, thickness,
condition of the wall).
• The centre of the monitor's gravity must be on the centre of the supporting plate.
• Use a spirit level when attaching the wall mount. Crooked attachment will affect stability.
• Before attaching the plastic covers (WM 4020), fix the cable lightly with adhesive tape and check the range
of movement.
• Various screws have been supplied for the attachment of the mounts to different screen models.
These include sets of 4 crosshead screws in the sizes M4x10 mm, M5x10 mm, M6x12 mm (Pos. 16).
Check which mounting drill-holes your screen has, then choose the four corresponding screws.
• N.B.: Make absolutely sure that the screws grip along their entire length into the threaded drill-holes of the
screen and that they are screwed tight. At the same time, you must also make sure that the screw threads
do not protrude too far into the inside of the screen, as this could damage sensitive parts.
The wall mount does not require any maintenance. However, the wall mount and especially the wall bracket
should be examined for damages from time to time.
N.B.:
Vivanco assumes no liability for damages caused by incorrect assembly or by improper use.
Hotline: consumer@vivanco.co.uk
GB
Werbung
