Replacing Lamps - Guzzanti GZC-60 Gebrauchsanleitung

Replacing lamps

Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs ensure they are cooled down.
1. Using a flat head screwdriver or equivalent tool, carefully pry loose the light cover.
2. Remove the damaged light and replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for
a G-4 base SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions and do not touch
new light with bare hands.
3. Reinstall the light cover. (it will snap shut).
If the lights do not work, make sure that the lamps are fitted properly into their housings before you call for
technical assistance.
8