SATA AE5721 Bedienungsanleitung Seite 10

Chapter I
Safety warning:
1 ）Be sure to carefully read and fully understand the instructions herein before use
2）Please charge the product for more than 3h before first use
3）Do not disassemble the machine without permission, or it may cause safety accidents
4）Please use the product at room temperature and keep it away from heat and fire sources
5）If swelling, liquid leakage or odor is found, please stop use immediately
6）Please charge the product regularly to ensure sufficient battery power and extend the service life
of the product
7）Please keep the product in a dry place at room temperature rather than a hot, humid and
corrosive environment
8）Do not carry out continuous ignition forcibly. Intermittent ignition is recommended to avoid
product damage
9）Do not connect the positive and negative battery clips （red + black -） reversely, otherwise,
i maycause safety accidents
10）When the battery power is lower than 10%, do not start the vehicle or use it for other charging
purposes, so as to avoid product damage
Warning:
The Attentions, Warnings, Tips in this Instruction cannot cover all possible conditions
Chapter II
Operating instruction:
Vehicle start:
Before starting the vehicle, please ensure that the battery power of the product is higher than 20% （two
indicators are on）, clamp the battery "+" electrode with the red battery clip and clamp the battery "-"
electrode with the black battery clip, and then connect the battery wire to the special port of the product to
start the vehicle. After the vehicle is started, remove the connecting terminal on the product, and then remove
the battery clip.
10
AE5721
中文
EN DE RU KO JA
PT ES