Instructions For Use - Starlyf Fast Heater Deluxe Bedienungsanleitung

been given supervision or instruction
concerning the use of the appliance in
a safe way and understand the hazards
involved. Children aged from 3 years
and less than 8 years shall not plug
in, regulate or clean the appliance, or
perform user maintenance.
CAUTION: Some parts of this product
can become very hot and cause burns.
Particular attention must be given where
children and vulnerable people are
present.
This appliance can be used by children
aged from 8 years and above and by
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning the
use of the appliance in a safe way and
understand the hazards involved.
Children should not be allowed to play
with the appliance.
Cleaning and user maintenance should
not be performed by children without
supervision.
- Unplug the heater when not in use.
- Do not use the heater if the plug is
damaged, the heater does not work
properly, or the device has fallen and
been damaged in any way. Throw it
away or take it to an authorized technical
service centre for examination and repair.
- Do not use the product outdoors. If the
heater is exposed to inclement weather
(rain, snow, sun, wind or extreme
temperatures), it could become a safety
hazard.
- Never place the heater where it can fall
into a bath or any other container with
water.
- To disconnect the heater, first switch the
ON/OFF button to the OFF position and
then unplug it from the wall socket.
- Do not allow any objects to enter the
air intake and outlet vents or to block the
vents, as this could cause electric shock,
fire and damage to the heater.
- To prevent fire, do not block the air
intake and outlet vents in any way. Do
not use the heater on soft surfaces (such
as a bed) where the air vents could be
blocked.
- The heater has hot parts and interior
parts that can produce sparks and electric
arcs. Do not use in places where gasoline,
paint or flammable liquids are stored. Do
not use flammable solvents to clean the
device. Keep the product dry at all times.
- The heater should only be used as
described in this manual. Any other use
not recommended by the manufacturer
could cause fire, electric shock or
personal injury.

2. INSTRUCTIONS FOR USE

1. Plug the Starlyf® Fast Heater Deluxe into a 220-240V
socket. (1)
Use the plug rotation button to adjust the device to
your wall socket. Regardless of how the plug is rotated,
the device should always be operated in the vertical
position.
ADJUSTING THE DIRECTION OF THE PRONGS ON
THE PLUG
- Press and hold down the plug rotation button.
- Carefully use your other hand to turn the prongs to
the desired position, as shown in the figure. The prongs
have two positions: vertical and horizontal. However, the
device should always be set up to operate in the vertical
position (never horizontally).
- Release the plug rotation button to lock the prongs in
place. (8)
Note: Press the button again to adjust the position as
needed.
2. To turn on the heater, switch the ON/OFF button (on the
side of the device) to the ON position. (2)
3. Select the desired temperature. On the device itself or
the remote control, press the "+" button to increase the
temperature and the "-" button to reduce it (between 15ºC
and 32ºC). (3)
4. Select the desired fan speed. On the device itself or the
remote control, press the fan speed button to choose either
high speed (HH) or low (LL). (4)
5. When you finish using the device, switch the ON/OFF
button to the OFF position and unplug the Starlyf® Fast
Heater Deluxe from the power socket. Store the device in a
cool, dry place until the next time you need it. (5)
NOTE: the device will stop producing heat when it reaches
the selected temperature.
Press the ON/OFF button on the remote control to select
standby mode. When this mode is selected, the digital