Werbung
ENGLISH
1.)
Before starting, please read our assembling instructions carefully and make yourself familiar with them.
2.) Follow our assembling instructions carefully.
3.) Compare the listed parts and fitting list to the contents of the cardboard.
4.) Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
in some way to difficulties during the assembling.
5.) To makesure that the furniture will not be damaged or grated during assembling, prepare an adequate area and
cover the floor with the cardboards or another soft pad (i.e. cloth or carpet).
6.) We recommend operating always with two or more people.
7.) 00 not overwind screws. Check the screws from time to time and if necessary retight them.
8.) Keep the instruction and service sheets. Perhaps you will need them later on.
For wooden furniture consisting of glass and steel or MOF and coated surface:
Wooden Furniture: Stains can be taken off with a soft, moistened cloth or by using a special polish (available in
supermarket ond specialized stores). But do not forget to wipe the surface with a dryand soft cloth ofterwards.
Steel furniture:
The metal has a varnished surfoce. The material could show little discrepancies in colour, c10uds or stains due to the
machine made production which should not be a reason for
If some metal parts have been twisted out of shape during tronsport, you could carefully try to twist them into the
original position. PIease do not overwind the screws ond retight them from time to time.
MOF and coated surfaces:
MOF consists of wooden fibres (please read the a.m. instructions). 00 not work on the coated surfaces with knives
or sharp objects, as this could cause damage the material.
That should not be
reason for complaints afterwards.
0
Oue to machine made production,
standard sand paper. Please do it corefully in order to make sure that you will not remove too much of the material.
Carrying out the assembly is for adults only. Please, keep your children away during assembling. Children might
take small parts or fittings away or swallow them up. Ouring assembling it could also happen that parts of your
furniture fall down on your children. Please, therefore, protect them and make sure that you carry out the assembling
in theirabsence.
If your piece of furniture consists of glass, it should be handled carefully during assembling. Glass can break ot any
time and cause injuries. Therefore, you should protect your eyes and honds by wearing special c10thing and sofety
shoes, avoiloble in the supermarkets and speciolized stores.
We öre not liable for any material damage or injuries resulting from faulty assembling. We öre also not liable for
any damage resultant from lack of maintenance during use. (Le. retightening of screws/ ond etc ... ). We are not
lioble f?r any damage coused by faulty use or use agoinst its purpose.
We wish you a lot of joy and pleasure with your new piece of furniture.
Your Quality Assurance Team
Inter Link SAS
Imponant assembling suggestions:
Malntenance advlce:
the MOF parts can have sharp edges. You could chamfer them with a fine
WaTnlng:
complaint.
0
Bad tools lead
3 - 1 3
1
Werbung
