Seite 2
Universal-Rohrschneider für Isolier- und Hart-PVC-Rohre und weiche Kunststoff- und Gummischläuche Mit zwei auswechselbaren Messern: Flachmesser für Isolier- und Hart-PVC- Rohre Um einen genauen, rechtwinkeligen Schnitt zu erzielen, empfehlen wir folgende Handhabung: 1. Rohrschneider öffnen und Plastikrohr in Rollenführung einlegen. 2. Messer leicht andrücken und durch eine Umdrehung des Rohres Führungskerbe einschneiden.
Seite 3
Universal Pipe Cutter for insulating pipes, hard PVC pipes and soft plastic and rubber tubes With two exchangeable blades: Flat blade for insulating pipes and hard PVC pipes. To achieve a precise rectangular cut, we recommend the following procedure: 1. Open the pipe cutter and insert the plastic pipe in the roller guide.
Seite 4
Coupe-tube universel pour gaines et tubes en PVC dur et tuyaux en plastique souple ou caoutchouc Avec deux couteaux interchangeables: Couteau plat pour gaines et tubes en PVC dur Pour obtenir une coupe précise et angulaire, veuillez procéder comme suit: 1.