Universal Pipe Cutter
for insulating pipes, hard PVC pipes and soft
plastic and rubber tubes
With two exchangeable blades:
Flat blade
for insulating pipes and hard PVC pipes.
To achieve a precise rectangular cut, we recommend the
following procedure:
1. Open the pipe cutter and insert the plastic pipe in the
roller guide.
2. Press the blade lightly and rotate the pipe to cut a guide
notch.
3. Increase the blade pressure and rotate the pipe 2-3 times
until it is cut through.
Triangular blade
for soft plastic or rubber tubes
1. Open the pipe cutter and insert the tubes to the
roller guide.
2. Press the cutter handles firmly to cut the material off
at an angle.