Symbols Used In The Manual - Crown CT26011HX Originalbetriebsanleitug

Battery tool use and care
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack�
• Use power tools only with specifically designat-
ed battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns�
• Avoid unintentional switching on. Ensure the
on / off switch is in the off position before inserting
battery pack. Carrying the power tool with your finger
on the on / off switch or inserting the battery pack into
power tools that have the switch in accidents�
• Do not open the battery. Danger of circuit�
• In case of damage and improper use of the bat-
tery, vapors may be emitted. Provide for fresh air
and seek medical help in case of complaints. The
vapors can irritate the respiratory system�
• When the battery is defective, liquid can escape
and come into contact with adjacent components�
Check any parts concerned� Clean such parts or re-
place them, if required�
• Protect the battery against heat, e.g., also
against continuous sun irradiation and fire. There
is danger of explosion�
WARNING! Read all safety warnings and
all instructions.
• Protect the battery charger from rain and mois-
ture. The penetration of water in a battery charger in-
creases the risk of electric shock�
• Do not charge other batteries. The battery charger
is suitable only for charging lithium ion batteries within
the listed voltage range� Otherwise there is danger of
fire and explosion.
• Keep the battery charger clean. Contamination
may cause the danger of electric shock�
• Check the battery charger, cable and plug each
time before using. Do not use the battery charger
when defects are detected. Do not open the battery
charger yourself and have it repaired only by quali-
fied personnel using original spare parts. Damaged
battery chargers, cables and plugs increase the risk of
electric shock�
• Do not operate the battery charger on easily in-
flammable surfaces (e.g., paper, textiles, etc.) or in
combustible environments. There is danger of fire due
to the heating of the battery charger during charging�
Service
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power tool
is maintained�
• Follow instruction for lubricating and changing ac-
cessories�
Safety guidelines during power tool op-
eration
• Considering that asbestos may cause cancer, as-
bestos-containing materials shall not be processed�
• During work, you must tightly hold the power tool
and ensure you stand firmly. You should hold the pow-
er tool with your hands�
• Do not reach into the mixing container with your
hands or insert any other objects into it while mixing�
Contact with the stirrer paddle may lead to serious per-
sonal injury�
• In case the power tool should fall into the stirred so-
lution, switch off the plug immediately and have the
power tool checked by a service center� Material that
has penetrated into the power tool can cause damage
and lead to an electric shock�
• Do not process explosive substances (for example,
highly inflammable solvents) and materials with igni-
tion temperature of lower than 21°С. Study the manu-
facturer's instructions for such kind of materials care-
fully and stick to them�
• Take protective measures if combustible or explo-
sive dust, harmful to one's health, may appear during
working�
• It is strictly prohibited to use the power tool for mix-
ing any food products�
• The container for mixing must be durable enough,
and it must be placed on stable surface�
• When mixing, prevent splashes from getting on the
tool body as it may cause electric shock�
• Always wait until the power tool has come to a com-
plete stop before unhand it�
• Avoid overheating your power tool, when using it for
a long time�
• Don't operate the power tool in stationary mode (e�g�
placing it into special frame)�

Symbols used in the manual

Following symbols are used in the operation manual,
please remember their meanings� Correct interpreta-
tion of the symbols will allow correct and safe use of
the power tool�
Symbol
English
18
Meaning
Cordless mixer
Sections marked gray - soft
grip (with insulated surface)�
Serial number sticker:
CT ��� - model;
XX - date of manufacture;
XXXXXXX - serial number�