Stocker Vulcano E-30 TP Benutzerhandbuch Seite 69

8
Components of the tool box
Tool
Large allen wrench
Small allen wrench
Screwdriver
Sharpening corundum stone
Wrench
Lubricant oil
Lubricant grease
Cleaning
When cleaning your pruner do not spray the pruner with water or immerse it in water.
1. Do not spray the equipment with water or immerse it in water, otherwise it may cause
electric shock.
2. Keep the handle of the ventilation tank, engine room and equipment clean.
3. Clean with a damp cloth or brush.
4. Do not use detergents.
5. Please clean the blade carefully after each use.
6.
Wipe the blade with an oily cloth and spray with metal protective spray.
7. After 8 hours of continuous operation, please disassemble the front cover of the
equipment to clean the wood chips and other impurities.
Blade lubrication
When the shears get used intensively, of after a long period of non utilization, check regularly
the lubrication of the gears of the blade. Follow the instructions of Image 1.
136
Art. 311
Pruning shears Vulcano E-30 TP
Cleaning and maintenance
Function
Fastening the blade
Opening large lid and unscrewing all screws of the
machine body
Unscrewing screw of small lid
Blade's sharpening
Unscrewing blade's lock bolt
Blades' lubrication
Gears' lubrication
Art. 311
Pruning shears Vulcano E-30 TP
Cleaning and maintenance
1. Open the small lid to check the amount of grease apply
on the gears.
1
Disassembly and assembly maintenance steps
General maintenance, cleaning, lubrication and blade replacement requires limited disassembly
and assembly of your pruner. The cover is fastened to the pruner by two screws. The center bolt
is secured with an adjustable gear nut which is locked into place by a gear nut clip. The gear nut
clip is secured by a single bolt. With the removal of the of the cover, adjustment clip, gear nut, and
center bolt you can access, maintain, clean, lubricate and replacement of blades when necessary.
1
1. Open the blade cover for cleaning and
maintenance. Make sure to not break the
fastening clip of the small lid.
For further information about the product, please contact info@stockergarden.com
Sign up to our newsletter and keep up to date with our latest news www.stockergarden.com/newsletter
8
2
2. Loosen adjustment clip bolt. Remove
adjustment clip bolt and adjustment clip.
Loosen gear nut. Remove adjustment gear
nut.
137