Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Driveway Alert Alarm Instruction Manual
Summary
● Strong anti-interference performance
● The full range of fine temperature compensation
● CE, FCC and ROHS compliant
Speci cation
● Power Supply (Receiver): DC 6 V or 1.5 V C Battery x 3
● Power Supply (PIR Transmitter): DC 4.5 V (1.5 V AAA Battery x 3 )
● Working Current (Receiver Alarming): ＜180mA
● Working Current (Receiver Chiming): ＜200mA
● Working Current (PIR Transmitter): ＜15mA
● Quiescent Current (Receiver): ＜400uA
● Quiescent Current(PIR Transmitter): ＜50uA
● Sensing Angle: 45°
● Sensing Distance: 5–8 m
● Ring Volume: ≥100dB ( within 0.5 m)
● Reception Sensitivity: ≥- 85dBm
Accessories List
● 2 x PIR Transmitters
● 4 x Wall Plugs
Names for Parts
(1) LED Indicator
(4) Switch for Chime, Low, Alarm
(7) Auto-learning Code Button
(1)
(2)
Downloaded from
www.Manualslib.com
● 1 x Receiver
● 1 x Instruction Manual
● 4 x Screws
(2) Speaker
(3) DC 6V Input Jack
(5) On/Off Switch
(6) Sound-and-Flash Switch Button
(8) PIR
(9) LED Indicator
(3)
(5)
ON
OFF
(6)
CHIME
LOW
ALARM
(7)
(4)
(8)
(9)
1
manuals search engine
Battery Installation (Receiver)
1. Remove the screws on the rear of the Receiver with a cross-headed screwdriver. Remove the
battery compartment cover.
2. Insert three C type batteries in the battery compartment according to the"+ -"marks.
3. Replace the battery compartment cover and secure the screws.
Battery Installation (PIR Transmitter)
1. Remove the screws on the rear of the PIR Transmitter with a cross-headed screwdriver. Remove
the battery compartment cover.
2. Insert three A A A 1.5 V batteries in the battery compartment according to the"+ -"marks in the
battery compartment.
3. Replace the compartment cover and secure the screws.
Wall Mount（Receiver and PIR Transmitter）
PIR Transmitter Unit
Drill a hole on the wall at your required height.
Insert a wall plug (included) into the hole.
Then insert a screw (included) into the wall plug. Be noted
that you should not insert completely the screw into the
wall plug, but keep a suitable length out of the wall surface,
which is to hold the transmitter.
Finally you can hang the transmitter.
(Mounting on UPVC or metal doorframe surfaces will reduce the transmitting range.)
3 x C 1.5V
Alkaline Battery
3xAAA 1.5V
Alkaline Battery
2
1
2
Werbung
