GRAVITY GSP2472B Bedienungsanleitung

GSP2472B
Adjustable speaker pole with crank, 35mm to M20
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and as-
sembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other informa-
tion from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://
www.adamhall.com/media/shop/downloads/documents/manufacturersdec-
larations.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste sep-
aration)
This symbol on the product, or the documents accompanying the product, indi-
cates that this appliance may not be treated as household waste. This is to avoid
environmental damage or personal injury due to uncontrolled waste disposal.
Please dispose of this product separately from other waste and have it recycled to
promote sustainable economic activity.
FEATURES
35 mm speaker pole with M20 threaded end
Crank operation for easy speaker raising and lowering
Variable length from 0.8 m to 1.1 m
40 kg load capacity
INTRODUCTION
The Gravity SP 2472 B is a heavy-duty 35 mm speaker pole with convenient rack
and pinion hand crank to facilitate raising and lowering your speakers. Made of
hardwearing steel with black powder coating finish, it features a 40 kg load capacity,
variable length from 0.8 m to 1.1 m and a male threaded M20 bottom end.
SPECIFICATIONS
Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
Product type:
Type:
Tubing material:
Tubing colour:
Tubing surface:
Min height:
Max height:
Joint material:
Tubing diameter:
Max. load:
Interchangeable rings:
Black ring pack included:
Weight:
Stands and Tripod Accessories
Speaker Stands
steel
Black
powder coated
800 mm
1100 mm
metal
35 mm
40 kg
1 x 20 mm
yes
3 kg