NVB-6030JB, NVB-6035JB, NVB-6040JB - user's manual ver. 1.0
1. Introduction
Wall/ceiling internal/external mount brackets NVB-6030JB, NVB-6035JB and NVB-6040JB are
designed for IP camera 6000 series. A complete list of compatible cameras is available in the product
data sheet on http://www.novuscctv.com/en.
2. Package contents
Wall / ceiling mount bracket
Mounting screws/pins
Mounting template
Foam gasket
Cable gland
3. Technical specification
Bracket type
Material
Colour
Load capacity
Dimensions
Weight
4. Installation manual
1. Pick a suitable location and provide all necessary wiring in desired bracket mounting place.
2. Mark 4 mounting holes and drill them in selected locations (optionally use mounting template).
3. Stick foam gasket to back side of bracket (base), unscrew bracket base and cover.
4. Put wiring through cable gland, than mount cable gland in one of holes in bracket base. Plug
unused holes with attached end caps and if required, please seal it with appropriate sealing mass.
Tighten cable gland until feel resistance.
5. Screw the base of bracket to the wall. It is recommended to mount bracket so hole from side is
directed downwardly.
CAUTION! Please note that the wall must have enough str ength to suppor t the bracket with
camera.
6. Put all cables from camera through the central hole of bracket cover.
7. Screw the camera to the cover of bracket using screws from accessories, use gasket from cover of
bracket to keep degree of protection.
8. Connect the camera cables and wires into base of bracket.
9. Screw cover of bracket (with camera) to the base of bracket.
CAUTION! To keep degr ee of pr otection seal ever y holes and possible leaks place using
additional sealant, both in bracket and camera.
All rights reserved © AAT SYSTEMY BEZPIECZEŃSTWA Sp. z o.o.
Wall/ceiling mount bracket, internal/external
Aluminium
White
10 kg
Detailed dimensions showed on diagram
Nr
0,4 kg - NVB-6030JB
0,5 kg - NVB-6035JB
1
0,6 kg - NVB-6040JB
2
3
Kątownik-prowadnica
4
Skrzydełka mocujące
5
Pierścień mocujący
6
Śruba dystansowa
7
Śruby maszynowe
8
1 pc
1 set
1 pc
1 pc
1 pc
Nazwa
Sztuk
1
Maskownica
Podstawa
1
3
3
1
3
7
3
Pierścień Segera
Opis
tworzywo: ABS
stal
stal
M4
stal
M4, L=55
M4, L=6
Ø=4