Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• You can connect your stereo headphone to the jack-socket (OUTPUT UNBAL).
• Connect the connection cable of the power-unit with the DC IN-socket. Plug the power unit into your outlet
(Power-LED on).
• If you want to add phantom power to your microphone, press the PHANTOM POWER-botton.
• By turning the GAIN-control you can set the level of the input signal.
• The Clip-LED flashes when the output signal starts distorting.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
12 V DC, 150 mA
Input impedance:
10 kOhm bal./unbal.
Max. input level:
+4 dB bal./+10 dB unbal.
Gain:
50 dB XLR/44 dB jack
T.H.D.:
0.01 %
Dimensions:
143 x 93 x 45 mm
Weight:
590 g
Please note: Every information is subject to change without prior notice. 21.10.2008 ©
Stereo 1/4" jack-plug:
Tip
Right
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Ring Sleeve
Left
Ground
11/11
00026771.DOC, Version 1.1
Werbung
Inhaltsverzeichnis
