Technical Data - SW-Stahl 72350L Bedienungsanleitung

T E C H N I C A L DATA
Length:
Range:
Resolution:
Accuracy :
Max. measuring speed:
Display:
Oprerating temperature:
Ideal work temperature:
Relative humidity max.:
C A R E E A N D M A I N T E N A N C E
If the LCD screen flashes, the Battery must be replaced. Clean the surface with a dry cotton cloth.
Do not use acetone or alcohol to clean them!
S T O R AG E
The tool is too dry and dust-free store in the supplied case, do not suspend any aggressive
substances or liquids. The maximum storage temperature is 5 to 40 ° C at a relative humidity. 80%.
Do not store the caliper outdoor.
D I S P O S A L
If you dispose the device, observe the applicable safety and environmental protection.
The digital vernier caliper contains material that may be taken for recycling. Batteries should be
disposed of in accordance with applicable law.
Damage caused by non-observance of these operation instructions or by improper repairs
is not covered by our guarantee. We reserve the right to make changes in the interest of
technical progress.
6
235 mm
0 – 150 mm / 0 – 6˝
0,01 mm / 0,0005˝
(< 100 mm) 0,02 mm / 0,001˝ (> 100 - 200 mm) 0,03 mm / 0,001˝
1,5 m/sec / 60˝/sec
LCD-Display
+5° bis +40° C
+20° C
80%