Wear Parts; Technical Data - aquanique PP-2500 Gebrauchsanleitung

- EN -
Pond Pump PP-5000/PP-9000/PP-12500
Cleaning/replacing the impeller unit
How to proceed:
 F
1. Remove the filter housing.
2. Unscrew the pump housing by turning counter-clockwise and remove (bayonet closing mechanism).
3. Remove the impeller unit.
4. Clean all parts.
– Use a soft brush.
– Rinse parts in clean water.
5. Reassemble the unit in the reverse order.
Storage/overwintering
The unit is not frost-proof and has to be removed and put into storage if minus temperatures are expected.
How to correctly store the unit:
• Thoroughly clean the unit, check it for damage and replace any damaged parts.
• Protect electrical connections from moisture and dirt.
• Store the pump submerged and in a frost-free environment.
• Protect open plug connections from moisture and dirt.

Wear parts

• Impeller unit
Disposal
N O T E
Do not dispose of this unit with domestic waste.
• Render the unit unusable beforehand by cutting the cables and dispose of the unit via the return system
provided for this purpose.

Technical data

Description
Mains voltage
Mains frequency
Max. power consumption
Connection outlet
Max. flow rate
Max. head height
Max. immersion depth
Cable length
Permitted water temperature
Dimensions Length
Width
Height
Weight
14
PP-2500
V AC 220 ... 240
Hz 50
W 27
G½
l/h 2200
m 2,75
m 0,9
m 10
°C +4 ... +35
mm 150
mm 100
mm 100
kg 1.65
PP-5000 PP-9000
220 ... 240 220 ... 240
50 50
50 90
G¾ G1½
4700 9000
3,65 4,1
0,9 0,9
10 10
+4 ... +35 +4 ... +35
160 250
100 125
100 150
1.8 2.4
PP-12500
220 ... 240
50
120
G1½
12200
4,7
0,9
10
+4 ... +35
250
125
150
2.5