Control Elements; Operation - Sygonix SY-PS-400 Bedienungsanleitung

Control Elements

1 2
7
8
1 4x USB charging ports 4 Socket (switch 3)
2 Socket (switch 1) 5 Power button
Status indicator light
3 Socket (switch 2)
6 Power cable to plug
Connection
• Connect the plug (6) to a regular grounded mains socket.
• Plug a load into an available socket (2), (3), (4) or USB socket (1).

Operation

a) Power Button Status Indicator Light
LED Status Description
Steady on (blue) Power on and connected to WLAN
Steady on (blue) Power on but not connected to WLAN
Off No power to connected loads/not connected to WLAN
Flashing fast blue
Device is ready to be paired with application.
(2x per second)
Flashing slow blue
Device is ready to be paired with application in AP mode
(1x every 3 seconds)
b) Power On
• Press the power button (5) to turn the power strip on/off.
• The status indicator light (5) and port status lights (7) turn on to indicate that power is being
delivered to connected loads.
c) Socket Control
Individual sockets can be turned on or off remotely. Refer to the app manual to learn more
about socket controls.
d) USB Charging Ports
The 4 USB charging ports can provide power to devices connected via USB cable (e.g. charging
of mobile device), and do not serve as a data ports. See section "Technical Data".
All 4 ports can be turned on or off remotely. Refer to the app manual to learn more about port
controls.
Over Current Protection
If the total current of the power strip exceeds the maximum permissible current (see "Technical
Data"), the power strip turns itself off automatically.
Follow the below steps to restart the power strip:
• Remove the loads that make the total current exceed the limit.
• Press the power button (5) to turn the power back on.
Reset Device
• If the device is not functioning correctly you may need to perform a reset.
• Turn the power off and remove any connected loads.
• Disconnect the device from the mains power supply and wait 10 seconds before connecting
again.
• Press and hold the power button for more than 5 seconds, release when the indicator blinks
rapidly (about two times per second).
Maintenance and Cleaning
• The product does not require any maintenance. You should not open/disassemble it. Repair
or maintenance work must be carried out by a specialist.
• Before cleaning, turn the product off and disconnect it from the power supply. Disconnect
connected loads.
• You can use a clean, dry, soft cloth for cleaning. Dust can be very easily removed with a
soft, clean brush and a vacuum cleaner.
• Do not use aggressive chemical or scouring cleaning agents, as this may lead to
discolouration or changes in the material on the surface.
3 4 5
7 Socket status lights
8 Openings for wall
mounting
Declaration of Conformity (DOC)
Conrad Electronic SE, Klaus-Conrad-Straße 1, D-92240 Hirschau hereby declares that this
6
product conforms to the 2014/53/EU directive.
Click on the following link to read the full text of the EU declaration of conformity:
www.conrad.com/downloads
Select a language by clicking on a flag symbol and enter the product order number
in the search box. You can then download the EU declaration of conformity in PDF
format.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste. At the end of its service life, dispose of the product in accordance
with applicable regulatory guidelines. You thus fulfill your statutory obligations and
contribute to the protection of the environment.
Technical Data
Rated input ................................... 230 V/AC, 16 A, 50 Hz
Rated power ................................. max. 3680 W
Heat-resistance ............................ 750 °C
Sockets ......................................... 3 x type F
Plug .............................................. Type F
Standby power consumption ........ 0.8 W
Over current (surge) protection .... 200 J
Child protection ............................. Yes
Wi-Fi ............................................. IEEE 802.11 b/g/n, 2.4 GHz
Frequency range .......................... 2412 - 2472 MHz
Transmission power...................... max. 20 dBm
WLAN security .............................. WPA, WPA2, WPA/WPA2
WLAN range ................................. 15 m
USB-A output ................................ Total: 5 V/DC, max. 4.2 A
Protection class ............................ I
Device name ................................. SY-PS-400 Smart Wi-Fi Socket Strip
App OS ......................................... Android, iOS
App support .................................. Amazon Alexa, Google Home, Conrad Connect
Operating conditions ..................... 0 to 35 ºC, 5 – 75 % RH (non-condensing)
Storage conditions ........................ -10 to +60 ºC, 5 – 75 % RH (non-condensing)
Cable ............................................ length:1.5 m, OD: 1.75 mm², H05VV-F 3G 1.5 mm²
Dimensions (W x H x D) ............... 360 x 58 x 47 mm
Weight .......................................... 707 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). All rights
including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication
represent the technical status at the time of printing.
Copyright 2020 by Conrad Electronic SE.
Each: 5 V/DC, max. 2.4 A
*2226163_v2_0220_02_dh_m_en