Herunterladen Diese Seite drucken

1 BY ONE O00QH-0512 Bedienungsanleitung

Ahrtsalarm

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 3
WIRELESS DOOR CHIME
KITS USER MANUAL
1byone Products Inc.
2313 E,Philadelphia Street,Unit M, Ontario,CA 91761
www.1byone.com
Downloaded from
www.Manualslib.com
manuals search engine

Werbung

loading

Inhaltszusammenfassung für 1 BY ONE O00QH-0512

  • Seite 1 WIRELESS DOOR CHIME KITS USER MANUAL 1byone Products Inc. 2313 E,Philadelphia Street,Unit M, Ontario,CA 91761 www.1byone.com Downloaded from www.Manualslib.com manuals search engine...
  • Seite 2 Wall Mount Drill two holes on the wall at your required height. The distance between Driveway Alert Alarm Instruction Manual the two holes should match the two hanging holes at the back of the receiver. Then insert two wall plugs (included) into the holes. Summary After that, insert two screws (included) into the wall plugs.
  • Seite 3 Wandbefestigung Schrauben Sie zwei Löcher auf der benötigten Höhe in die Wand. Passen Au ahrtsalarm Bedienungsanleitung Sie auf, dass die Löcher die gleiche Entfernung haben wie die Vorrichtung auf der Rückseite des Empfängers. Stecken Sie die zwei Dübel in die Löcher in der Wand. Zusammenfassung: Schrauben Sie danach die zwei Schrauben in die Dübel.
  • Seite 4 Montage Mural Percez deux trous sur le mur à la hauteur désirée. La distance entre les Instruction d'Utilisation d'Alarme d'Alerte deux trous doivent correspondre aux deux trous d'accrochage à l'arrière de la récepteur. Ensuite, insérez deux prises (fournies) dans les trous. Résumé...
  • Seite 5 Montaje en la pared Manual de instrucciones de la Realice 2 agujeros en la pared a la altura deseada. La distancia entre los 2 agujeros de la pared debe coincidir con la de los 2 agujeros alarma para la entrada de coches de la parte posterior del receptor.
  • Seite 6 Montaggio a parete Praticare due fori sulla parete all'altezza desiderata. La distanza tra 1byone Allarme Casa Wireless - 1 Sensore i due fori deve corrispondere ai fori sul retro della ricevitore. Quindi inserire due tasselli (in dotazione) nei fori. Caratteristiche Dopo di che, inserire due viti (in dotazione) nei tasselli.