Eurotops 2 in 1 Bedienungsanleitung Seite 5

Spray Mop "2 in 1"
Spray mop and window squeegee in 1
Assembly:
1. Insert mop head D or window wiper head E into B. Make sure that the button clicks up
and locks in place.
2. Align handle A with upper portion of B and gently slide these two parts together. Make
sure that all parts are locked in correctly.
3. Fill cleaning fluid reservoir C with desired cleaning liquid. Align the back of the fluid
reservoir C with spray body B and firmly insert into the spray body. Turn reservoir
latch until it locks in place on the fluid reservoir.
4. Pull the trigger on the handle A until fluid comes out of the front of the mop.
ATTENTION!!!
The returns will be impossible if products were damaged because of incorrect use.
DISPOSAL：
The packaging material is reusable. Dispose of the packaging in an environmentally friendly
way by putting it in the appropriate recyclable waste collection containers.
Eurotops Versand GmbH
Elisabeth-Selbert-Straße 3
40764 Langenfeld, Germany
If technical support is needed, please call ...
in Germany 0180 . 530 63 63* or
in Austria 01 . 230 60 43 12 or
in Switzerland 044 . 28 36 125 or
in the Netherlands 026 . 37 36 333 or
in France 0892 . 700 470** or
In Norway tkd@eurotops.de
* 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network
**34 Cents/minute via French landline
A possible return of products should be addressed to the return address stated on your
invoice.
© 1.06.2019
info@eurotops.de
info@eurotops.at
info@eurotops.ch
info@eurotops.nl
info@eurotops.fr
GB