App Control - Chuango PT6 Kurzanleitung

EN
3. There are two ways to add the device:
EZ Mode: Power on the device. If the indicator is blinking fast, enter the Wi-Fi
password on the app and then wait for the connecting process to complete.
AP Mode: If the EZ Mode is not working or if the indicator is blinking slowly*, you
can try AP Mode. Tap the pairing mode icon at the top right corner and select AP
Mode. Then,enter the WiFi password and connect to "SmartLife-XXXX" on the Wi-Fi
list from your mobile device. Once you are connected, return to the app and wait for
the connecting process to complete.
EZ Mode:
* You can press and hold the Configuration Button underneath the camera lens for 5
seconds to switch between EZ Mode and AP Mode.
EZ Mode (by default) and AP Mode.
AP Mode:
Step 3

App Control

1. Device Name
2. Device Status
3. Simultaneous Multi-Camera Viewing
Tap the device to access real-time view and additional device settings.
Snapshot: Tap to take screenshots that will be saved directly in
①
Speak: Press and hold the microphone button to talk and then release the button
②
when
you finish talking. Anyone in the vicinity of your camera will be able to hear you.
Record: Tap to record video clips that will be saved directly in
③
Playback: Tap to view the 24/7 video (requires a microSD™ card).
④
Cloud Storage: Camera will upload encrypted video data to the cloud once the
⑤
cloud service is subscribed.
Pan-tilt control of the camera: Tap the arrows in four directions respectively to
⑥
adjust the overall view of your camera monitoring area.
Alarm: Tap to activate or deactivate motion detection or adjust its sensitivity.
⑦
Photo Album: Tap to browse screenshots and recorded video clips
⑧
Audio: Tap to enable audio for the surrounding area of your camera. Tap it again
⑨
to turn the function off.
Video Resolution: Tap to switch the video resolution from HD to SD.
⑩
Full Screen: Tap to have a full screen view of the camera.
⑪
Camera Settings.
⑫
EN
Photo Album.
⑧
Photo Album.
⑧