EuroLite USB-DMX512-PRO Bedienungsanleitung Seite 6

Select Browse my computer for driver
5
software.
Click Browse- and select the driver file USB-
6
DMX512 Pro.inf. Then click OK and Next.
Confirm the warning Install this driver software
7
anyway. Then Close the screen.
The driver has been successfully installed and the
8
device manager no longer indicates a warning.
The interface is now ready for operation.
www.eurolite.de
Using the FreeStyler Application
The interface is fully supported by FreeStyler as of
version 3.37. FreeStyler is available as freeware under
www.freestylerdmx.be.
Select EUROLITE USB-DMX512 PRO from the list in
the Interface Setup of the application and the
corresponding COM port. Open the device manager to
find out which COM port the interface uses. For further
information, please refer to the application's
documentation.
Adjusting the COM Port
In case of conflicts between ports or if the software
used requires a certain range, you can adjust the COM
port.
Open the device manager where the interface is
1
listed as USB Serial Port under Ports (COM &
LPT). Double-click this port. This will bring up the
Properties. Select the Port Settings tab and
click Advanced...
Select a free COM port and confirm with OK.
2
Item 51860120