General Instructions; Maintenance - ECOPOSTURAL S3660 Anweisungen

English
Ecopostural thanks you for buying our products. The item you have just purchased has been
manufactured according to high quality and security standard. Follow the below-mentioned instructions
carefully in order to be able to make use of it for a long time. Click on to the TECHNICAL INFORMATION
section in our website www.ecopostural.com
Our company will decline any responsibility for a product damage occurred if ignoring our
operating instructions. We will not be liable for any accident or harm resulting from an undue or
negligent use.

1) GENERAL INSTRUCTIONS

- Please read carefully the operating and safety instructions before using our products. These instructions
must be adhered to. Keep the instructions booklet for further check-ups.
- Familiarize yourself with the precise use of the item.
- Worn or damaged pieces must be solely replaced by original pieces by the manufacturer depending on
the table model.
- All components parts or accessories should be fitted or fixed in according to the special manufacturer's
instructions. Any spare / replacement component part different to the manufacturer's could be dangerous
for the people involved in the table handling.
* Notice: The use of non original pieces or the alteration of the item will incur in a loss of validity
of the manufacturer's guarantee, instructions and Declaration of Conformity.
2) OPERATING INSTRUCTIONS
a) SET UP
This product is dispatched flat pack for an easier transport.
First fix the castor wheels into the stool base, then insert the cylinder and finally the seat, as shown in
the graphic explanation.
b) LOAD capacity
This item has been tested to support a MAXIMUM STATIC WEIGHT of 120 Kg evenly distributed over the
seat.
c) HEIGHT adjustment
To adjust the height, the stool is equipped with a gas spring operated by the seat lever A.
Fix the required height by simply pushing the lever upwards, thus releasing the gas spring, and get the
seat simultaneously to the desired position.
d) SECTIONS adjustment
The stool SEAT tilts.
How to adjust the tilting: When seated on the stool, press the lever B situated at the right hand side of the
seat while you lean forward or backward to make the seat tilt. Once the desired position's been achieved,
simply release the lever to lock the seat.

3) MAINTENANCE

a) FRAME
In order to preserve the durability of the product you are purchasing, we recommend you to do the dusting
STOOL
INSTRUCTIONS
5