AGK 10859 Bedienungsanleitung Seite 7

– You can save up to 20 stations. Short press FAV and rotate ENTER to check and choose the preset station; You
may press the number on the remote control to choose the saved station.
– Alternatively, you can let the system scan ALL stations for you by pressing ENTER, The searched stations will
automatically be stored in preset station list.
– Tips: If you go back to the menu when playing station, volume cannot be adjusted by the reel, use the volume keys
on the remote control instead. Otherwise, you may stop controlling the system, it counts 10 seconds and return to
playback display automatically, then you are able to adjust the volume.
Notes: The radio will come to standby mode in 15 minutes when mute
7. AUX IN
Aux in mode plays audio from an external source such as an MP3 player.
8. Information Center
8.1. Weather Information
– There are weather information and forecasts for 2000 cities. SELECT the country and then the city for the weather
detail.
– It is able to display the weather information on the standby mode. On the weather information page, press ENTER
to set the city to displaying on the standby mode.
8.2. Financial Service
– View the stock index from around the world.
8.3. System Information
– Check out the version of the 10859 system, and the details of connected network.
All manuals and user guides at all-guides.com
12
9. Troubleshooting
Error Remedy
The device does not
Check it the power adaptor is connected properly.
switch on.
1. Turn on the sound as it may be muted
No sound.
2. Increase the volume.
1. Check the WLAN function.
2. Try to set an IP address at the device.
No network con-
nection can be
3. Activate the DHCP function on the router and make the connection again at the device.
established.
4. A firewall is activated on the network - set the respective program in such a way that
access is possible.
1. Check the availability of WLAN network on the access point.
WLAN connection
2. Place the device closer to the router.
cannot be established.
3. Make sure the WEP/WPA password is correct.
1. Check the network as well as the access point and firewall.
2. The station may not be available currently, try it again later or SELECT another station.
No station is found. 3. The link of the station is changed or the station no longer transmits - ask the provider for
information.
4. The link of manual added station is not correct, make sure it is correct and re-enter.a
1. Check/move the FM antenna.
Hiss in FM mode.
2. Move the radio.
1. Switch on the alarm.
2. Due to the volume setting, refer to the solutions of "No sound".
Alarm does not work.
3. The source of alarm was set to be station but there is no network connection. Change the
source of alarm or reconfigure the connection.
System freezes
The radio is overloaded, reboot the unit.
suddenly.
10. Specifications
Model number 10859
Description Internet Radio
Display 128 x 64 dot matrix
Network supported 802.11b/g (WLAN)
WLAN key WEP, WPA, WPA2 (PSK)
NTP Network Time Protocol
RTSP Real Time Streaming Protocol
Streaming Protocol
MMS Microsoft Media Streaming Protocol
HTTP Hyper Text Transfer Protocol
WMA Windows Media Audio
MP3 MPEG Layer 3 Audio
Supported playback
formats
WAV Waveform Audio
AAC Advanced Audio Coding
Power adaptor 12V 1.5A
13