Werbung
Important! Please read this manual carefully before assembly
ENG
Thank you for buying our product, we hope that you will enjoy it.
Introduc on: This product is intended for private use to store materials, tools and gardening equipment.
Wood proper es: The product is made of natural wood. Its proper es may vary depending on weather condi ons and exposure met-
hod. During
winter season, it may slightly expand and shrink during summer season. Such varia ons in dimensions are normal and do not affect the
solidity, stability or func onality of the product. It is best to unwrap the elements 48 hours before assembly and store them in a roofed
area so that the wood can adapt to the air humidity.
Storage/maintenance/installa on: Before assembling the shed, remember to store the package in a place protected against weather
condi ons. If the product has not been impregnated in an autoclave, it means that it has not been impregnated at all. Therefore, it is
necessary to impregnate the parts of the shed using an insec cide, fungicide and a moisture protec on agent. Apply the first layer on the
inside/outside before assembly and leave un l dry for 72 hours in a dry place, away from sun, in a horizontal posi on. Before screwing
screws to the shed parts, drill holes in them. Also, remember to ensure expansion gaps if the shed shrinks in summer and expands in a
rainy season.
Founda ons:
Shed: Use a concrete floor, concrete blocks or other hard surface as the founda on. In each case, we recommend covering the floor or
the surface with a polyurethane foil in order to protect the shed from moisture. In order to ensure be er protec on of elements tou-
ching the surface, we recommend covering the bo om part with a thick layer of hydro-insula on (e.g. a bituminous layer). A er the
assembly, it is recommended to impregnate the shed with a solvent-based glaze or lacquer. We do not recommend installa on of the
shed in a place exposed to strong wind.
Shelter: Level the area where the shelter is to be placed. Flat, even surface will make work easier. Anchor the poles in the ground
(using H-shaped anchor bolts) and pour concrete when the structure is perfectly straight. We recommend making founda ons around 50
cm deep in the ground.
Use: In order to keep the shed in the best condi on, we recommend regular lubrica on of door hinges and the lock. Do not leave the
door swinging in the wind. During heavy snow, remove snow from the shed roof regularly if the snow layer is over 20 cm thick. Bitumi-
nous felt is a makeshi protec ve material ensuring ghtness and providing basic support. If the shed has been supplied with bituminous
felt, it should be changed when worn or replaced with a more durable, shingle-type sealing layer.
Warranty terms: The warranty is valid from the purchase date. Any warranty claims must be accompanied by the proof of purchase.
Our products are covered with a two-year warranty for manufacturing defects. Some peculiar features, such as: growth rings, discolo-
ring, straight gaps or gaps formed during drying are acceptable as they do not affect the quality of the product, wood bending, if the
assembly is possible, non-adjacent rings, resin pockets and any natural wood quali es. In the case of overlapping structure, please re-
member that all boards always have one be er looking side, which should face the outside of the shed (the other side can have slight
defects due to planing, bark, cracking etc.). The warranty covers all defects in workmanship or material and is limited to repair or repla-
cement of the defec ve part. Any possible costs of assembly, disassembly and impregna on are not covered. The warranty explicitly
does not cover any claims or compensa on. In the case of supply at an address of residence, any complaints concerning the condi on of
the goods supplied are accepted only in the form of a prepaid registered le er sent within 48 hours from the moment of supply of the
product to a given carrier (details of the carrier are given in the shipping document). We assume no liability for any damage resul ng
from storage or transport on the distributor's part. We are not obliged to accept any new products returned for reasons outside the
scope of our liability. If, as an excep on, such products are accepted, the client may be charged with any possible costs of repair or trans-
port. We never accept already assembled products. As far as wooden products are concerned, please remember that mber is a living
material that may naturally deform. Any claims regarding deformed elements must be accompanied by photographs of such elements.
Exclusion of warranty: misuse of the product, use of the product for commercial purpose, use of the product contrary to its intended
purpose, replacement of the whole or part of the product or its element, use of non-original replacement parts, use of the product in
condi ons contrary to its intended purpose. The warranty does not cover any defects related to the storage, assembly or insufficient
impregna on. The warranty does not apply in the case of harsh weather condi ons (wind > 100km/h and snow > 20 cm). The warranty is
excluded in the case of defects caused by improper leveling of the surface.
Service: For replacement parts, please contact the distributor and show the quality control sheet a ached to this manual. Service
requests will not be considered without the above men oned documents.
Please keep the quality control sheet a ached to this assembly manual in a safe place. It is required for the purpose of
complaint considera on.
4/16
Werbung
