Inhaltsverzeichnis
Werbung
6.7 Systeminformationen
Sie können aktuelle Informationen wie Receiverbezeichnung, Softwarestand,
Hardwarerevision, Herstellungsdatum usw. einsehen. <Figure 6.7.1>
WICHTIG !!
Diese Informationen sind Hilfreich beim Softwareupdate oder Serviceanfragen beim
Händler oder Hersteller.
<Figure 6.7.1>
6.8 Common Interface
1) CAM Initializing
To enjoy scrambled channels, you will need a Common Interface Conditional Access
Module (CAM) and a Smart Card from the service provider (program distributor). If you
are subscribing to services from more than one service provider, you will need a Smart
Card from each one, and may even need different CAMs (depending on the DVB
Common Interface standard each uses). Since a Smart Card is connected to a single
service provider, a limited range of channels will be available via it.
Note : Without the CAM and the smart card, you can watch only Free-to-Air
programs.
Insert a CAM into a receiver's slot designed for it, and a Smart Card into the CAM.
The message 'CAM Initializing' will appear on the screen. <Figure 6.8.1>
After the message 'CAM Initializing' has disappeared, you can select the channel that
you want to watch.
40
6.8 Common Interface
<Figure 6.8.1>
2) The Status of the CAM
You can access detailed information about the CAM using the
Main Menu to select 'CI' and pressing
Proceed with further instructions displayed on the screen to check more detailed
information depending on the CAM in use.
Note : Further detailed information is not mentioned in this manual since the
information depends on the CAM in use.
<Figure 6.8.2>
/
keys in the
CH
CH
. <Figure 6.8.2>
41
Werbung
Inhaltsverzeichnis
