Media-Tech MT3534 Gebrauchsanleitung

BLUETOOTH
NECKLACE EARSET
MOBILE MULTIMEDIA CENTER
Overview
1.
2.
3.
1. Power Switch
2. Charging Socket
3. Indicator Light
4. Answer/End/Play/Pause
5. Microphone
6. Headset Line
Power On
Turn power on , press pairing button , LED lights
up red & blue, if there is a mobile phone that was
previously paired and within distance (1 OM)
headset will connect automatically.
Pairing
Press & hold the Play button, LED fl ashes red &
blue, headset is ready to be searched, release
button.
Search from mobile phone, when found and dis-
played headset model in phone, select the mod-
el number then enter passcode "0000" when
prompted to establish connection.
Pause/Play
During music playback, toggles Pause or Play.
Charging
Plug the charger into socket on headset, LED
lights up red, LED turns off when fully charged.
Downloaded from www.Manualslib.com manuals search engine
Volume Down
During music playback, press once to decrease
volume one scale, when volume is at the lowest
headset will sound two beeps.
Volume Up
During music playback, press once to increase
4.
volume one scale, when volume is at the highest
headset will sound two beeps.
5.
Previous Track
During music playback, press once to return to
beginning of current track, or previous track, de-
6.
pending on the location of current track.
Next Track
During music playback, press once to go to be-
ginning of next track.
AnswerCal
When receive an incoming call, will hear ringing
in headset, press function button to answer.
End Cal
Press the function button to end a call.
Reject Call
When receive an incoming call, will hear ringing
in headset, press and hold the function button at
least 2 seconds to reject.
Redial last number called
Press and hold the function button for at least 2
seconds to redial last number called.
Power Off
Press and hold the function button until LED
fl ashes red & blue, release button, LED turns off
and power is off .
MT3534
Instructions Manual
EN