Sensitec NF-3101 Benutzerhandbuch Seite 10

10 English
To adjust the total variation of your the Non-contact Body Infrared
Thermometer.
Press "MODE" button for 2 seconds, the screen displays: F1. Press
"MODE" button two times to get F3. Select "UP" to increase the
difference by 0.1°C (0.1°F), "DOWN" to reduce itby 0.1°C (0.1°F).
ln the cases of seasonal or environmental changes a verification and
adjustment should be carried out.
Note: This function is only effective Body
10-4. Buzzer ON/OFF - F4(F3) Menu
Press "MODE" button for 2 seconds, the screen displays: F1. Press
three(two) times "MODE" button to get F4(F3).
Select "UP" to open the buzzer (a sound icon " " is displayed on the
LCD screen), press "DOWN" to stop it (the icon disappear).
10-5. Exiting The Setting Mode
Press "MODE" button until the screen turns off.
10-6. The Non-contact Body Infrared Thermometer is specially designed
to take the body temperature of a human being. For this, use the Body
mode. Measurement range for Body mode: 32 to 42.5°C (86 to 108°F)
You can also use the Non-contact Body Infrared Thermometer to
measure the temperature of an area or an object, a food, a liquid or a
room temperature. For this, use the Surface mode. Measurement range
for Surface mode: 0 to 60°C (32 to 140°F)
Important: The area temperature differs from the internal body
temperature. To obtain the internal temperature always use the Body mode.
Please make sure to select the Body mode for an internal temperature reading
and the Surface mode for an external area reading (bottle, bath, room...).
10-7. Data Memory
Data memory automatically after temperature measurements, which will
display at the right corner of LCD. Press "UP" or "DOWN" button to
display the last temperature measurement.