Base Plate - Chauvet Professional COLORado Batten Q15 Schnellanleitung

EN
Mounting
Before mounting this product, read the
weight of the product. For our Chauvet line of mounting clamps, go to http://trusst.com/productcategory/truss-clamps/.
Mounting Diagram
Mounting Clamps
Safety Cable
2 Mounting Points

Base Plate

Each COLORado Batten Q15 comes with a base plate and 2 retaining pins, which can be used for floor mounting or
vertical hanging.
The retaining pins each have a safety cable for added security.
Attaching the Base Plate
To attach the base plate to either end of the COLORado Batten Q15:
1. Align the base plate so the loops on the end of the product and the loops on the base plate line up and fit into
each other.
2. Tighten the captive screws on the base plate.
3. Press and hold the latch button down on the first retaining pin, and insert it through one of the sets of loops on the
product and base plate. Release the latch button, then repeat with the other pin.
3
QUICK REFERENCE GUIDE
Safety Notes. Make sure the mounting clamps are capable of supporting the
Latch Button
1
Safety Cable
1 Mounting Point
2
COLORado Batten Q15 QRG Rev. 1
Mounting Clamp
3