Alarm Conditions - DD H2Ocean Guardian Handbuch

ALARM CONDITIONS

ALARM
Flashing red with
audible alarm every
1 second.
Flashing green with
audible alarm every
2 seconds.
SKIMMER GUARDIAN START UP DELAY
The Skimmer Guardian has a built in delay of 2 minutes when first
powered on. This allows time for the water levels within the sump
or aquarium to normalise after a power outage, thus preventing the
skimmer from switching on when the sump water level is higher than
the normal operating level.
NOTICE
1. Please keep the controller/AC switch dry.
2. Product should be used for its intended purpose and any incorrect
operation will not be covered by warranty.
3. Do not use with skimmer cup drain open as the device will not
function as intended.
DESCRIPTION
The water level in
the skimmer cup has
activated alarm.
1. The sensor and the
wet-side magnet are
not aligned correctly.
2. The skimmer cup
is not clean and the
sensor can not see
the optic.
3. The sensor has
been initialised with
the sensor immersed
under water.
H 2 O c e a n S k i m m e r G u a r d i a n
ACTION
Empty the skimmer
cup.
1. Align the
magnets.
2. Clean the
skimmer cup
and/or optic.
3. Check sensor is
not in liquid when
powered on.
w w w.t h e a q u a r i u m s o l u t i o n . c o m
EN
5