Greencut GE180XE Betriebsanleitung Seite 59

7. Place the side nozzle (J) using the 4 corresponding M8 screws (K).
8. Loosen the side screws (L) on the top of the discharge hopper (M), lift the opening to the maximum and
proceed to the assembly of the interior screen. Hook the screen (N) on the shaft of the opening and fix it
with the screw to prevent it from falling. Place the lower part of the screen outside the lower axis of the
discharge opening.
7
9. Attach the transport handles (O and P).
J
K
9
O
8
M
N
59
L
P
EN