Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BEFORE FIRST USE
Before using the E-Scooter for the first time, it is recommended to check if the battery is completely charged.
We recommend you to fully charge the battery before first use and read this manual thoroughly.
Always verify if the E-Scooter has any damage before using it. Damages could lead to incorrect usage or
defects that can cause accidents.
ASSEMBLING
The E-Scooter is folded when placed in the box.
•
To unfold the E-Scooter, pull out the folding handle (5) to release and put the front bar up until it clicks
into place. Close the folding handle (5).
•
Attach both handles.
Note: To fold the E-Scooter again for easy storage, release the folding handle (5), and pull the front
bar down. Close the folding handle (5).
CHARGING
•
Put one side of the charging adapter cable into the charging port (6) of the E-Scooter.
•
Place the other side of the charging adapter cable in a power outlet.
•
During charging, the indicator light of the charger is red. The indicator light turns green when the
battery is fully charged.
-5-
Werbung
Inhaltsverzeichnis
