Waves BL-107072.1 Handbuch Seite 3

Before you go mounting or dismantle parts;
Before cleaning or maintenance work; After use.
9. Only have the appliance repaired by a qualified
service centre.
10. Qualified service center: after-sales service of
the manufacturer/importer, which is qualified to
carry out repair to avoid any kind of danger. In
case of problems please return the appliance to
this service.
Electricity and heat
1. Before use, check that the mains power supply
voltage is the same and the voltage is the same
as the voltage indicated on the appliance.
2. Always plug the appliance into an earthed plug
socket.
3. Regularly check the power cord for damage.
4. If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a
hazard.
5. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return
appliance to manufacturer or the nearest
authorized service agent for examination, repair
or electrical or mechanical adjustment.
6. To remove the plug from the plug socket, pull
the plug. Do not pull the power cord.
7. Make sure the power cord does not come into
contact with hot surfaces.