icklebubba Stomp Bedienungsanleitung Seite 12

Step 2: Seat Harness Attachment
a. Locate the holes which can be
found on either side of the seat
section of the seat unit fabric.
c. Loop the strap around the
circular piece of the chassis located
just above the release clips and then
slide the material through the small
gap between the silver buckle.
Seat Unit Set Up
b. Slide the waist strap through the
holes with the silver buckle end going
from inside to out.
d. Complete.
Adjust length of the harness to de-
sired position, ensuring a snug fit.
v.07.20
11