Targus DEFCON SCL Bedienungsanleitung Seite 12

Targus Notebook Security DEFCON® SCL Serialised Combination Cable Lock
3 After the alcohol dries, remove the backing on the
base plate to expose the adhesive and place it on the
prepared location. If desired, secure the base with the
two screws.
NOTE: W
-60°F (16°C),
RECOMMENDED FOR USE OUTDOORS OR IN A HIGH HUMIDITY ENVIRONMENT
B
ONDING TO GLASS
,
BRASS OR PLASTICIZED VINYL WITHOUT PRIMER SURFACE ARE NOT
RECOMMENDED
TO PROVIDE MAXIMUM SECURITY
MARGINAL SECURITY
4 Place the DEFCON Security Base Plate cover as
shown and slide it to the left or right to secure it in
place.
5 Insert your DEFCON cable lock.
HEN USING THE ADHESIVE BACKING
AND ALLOW IT TO BOND FOR MORE THAN
,
CERAMIC TILE
. T
ARGUS RECOMMENDS USING BOTH ADHESIVE AND SCREWS
.
,
APPLY AT ROOM TEMPERATURE
, -
WATER ABSORBENT MATERIALS
. U
SING ONLY THE ADHESIVE PROVIDES
12
24 . N
HOURS OT
.
, ,
COPPER