Unacare UNAwheel Mini Basic Bedienungsanleitung Seite 19

Attach the clamps
3.4.2
1
Loosen the two bolts of the clamps. Use a 5 mm Allen wrench.
2 Place the clamps on the bottom tube on the side of the wheelchair's frame.
Position it about 10 cm (4") behind the front edge of the cushion. In case of 25mm
(1") tube diameter use one layer of cloth insulating tape to protect wheelchair
frame, for 22 mm (7/8") use rubber spacers.
3
Secure the clamps by tightening their two bolts.
5
19
5