AVM Fritz!Wlan AC43- Mu-Mimo Handbuch Seite 4

This is MU-MIMO
FRITZ!WLAN AC 430 MU-MIMO supports MU-MIMO (Multi-user MIMO). FRITZ!WLAN
AC 430 MU-MIMO can be used with any wireless Internet routers, but provides its full
spectrum of performance especially when used in combination with wireless Internet
routers that support MU-MIMO.
MU-MIMO is a technology for the parallel use of multiple data streams in wireless
radio connections, and serves to increase the aggregate throughputs in a wireless LAN
cell.
To achieve signifi cant improvements in data transmission, the participating wireless
devices must support MU-MIMO in both the send and the receive direction. Yet even
wireless devices compliant with older standards, which support only single-user MIMO
technology, will benefi t, as more airtime is available in these "mixed environments".
MU-MIMO is currently enabled only in the downstream direction, that is for data
transfer from the wireless Internet router to the wireless device(s), and works only in
the close vicinity of the wireless Internet router.
6
Wireless LAN Connections
You can establish wireless LAN connections in two simple ways.
AVM Stick & Surf
Stick & Surf is especially simple
and secure. With Stick & Surf the
FRITZ!WLAN AC 430 MU-MIMO adopts
the security settings of a FRITZ!Box and
automatically establishes a secure
wireless LAN connection.
Read the description starting under
"Establishing a Wireless Connection with
Stick & Surf" on page 8.
WPS Quick Connection
The FRITZ!WLAN AC 430 MU-MIMO can
be connected with the wireless router
via WPS. WPS (Wi-Fi Protected Setup)
is a fast and simple way to establish a
secure connection between wireless LAN
devices. WPS is supported by all current
FRITZ!Box models with wireless LAN and
by many wireless routers from other
manufacturers. See the documentation
for your wireless router.
Read the description starting under
"Establishing a Wireless Connection
Using WPS Quick Connection"
on page 9.
7