Herunterladen Diese Seite drucken

SW-Motech SBL.05.376.100 Montagehinweise

Werbung

SBL.05.376.100
SUZUKI GSF 650 Bandit
Schutzbügel
Montagehinweise
Alle vom Motorrad gelösten Schrauben sind gemäß
Herstellerangaben wieder zu montieren, oder mit von
SW-MOTECH gelieferten Schrauben zu ersetzen. Falls
nicht anderweitig definiert, diese Schrauben nach
Tabelle anziehen.
M6
9,6 Nm
M8
23 Nm
M10
46 Nm
Gegebenenfalls Schrauben mit flüssiger
Schraubensicherung einkleben.
Prüfen Sie nach 50 km alle Verbindungen auf festen
Sitz.
SW-MOTECH GmbH & Co. KG
Bahnhofstrasse 44d
35282 Rauschenberg
-Germany-
Tel.: ++ 49 (0) 6425 8168 00
Fax: ++ 49 (0) 6425 8168 10
www.sw-motech.com
Crash Bar
Mounting Instructions
SW-MOTECH products should be installed by a qualified,
experienced motorcycle technician. If you are unsure
of your ability to properly install a product, please
have the product installed by your local motorcycle
dealer. SW-MOTECH takes no responsibility for damages
caused by improper installation.
All screws, bolts and nuts, including all replacement
hardware provided by SW-MOTECH, should be tightened
to the torque specified in the OEM maintenance manual
for your motorcycle. If no torque specifications are
provided in the OEM maintenance manual, the following
torques may be used:
M6
9,6 Nm
M8
23 Nm
M10
46 Nm
All screws, bolts and nuts should be checked after
driving the first 50 km to ensure that all are tightened
to the proper torque.
Medium strength liquid thread-locker (i.e., "Locktite")
should be used to secure all screws, bolts and nuts.
Schutzbügel
1
5
Crash Bar
SBL.05.376.901/902 L/R
BUS.00.08.043.058.01
Anzahl/
Anzahl/
Pcs.
2 (L/R)
Mutter mit Bund,
2
Sechskantschraube
6
Hexagon Screw
M10 x 250
DIN 6921
M 8
Anzahl/
Pcs.
1
Anzahl/
Distanzbuchse
3
7
Spacer
Da: 20; Di: 10.5; h: 50
KEK.00.M8
Anzahl/
Pcs.
1
Anzahl/
Distanzbuchse
4
Spacer
Da: 20; Di: 10.5; h: 9
Anzahl/
Pcs.
1
Bügelschraube
Sechskantschraube
8
Hexagon Screw
Bow Screw
M10 x 1,25 x 60 DIN 960
Pcs.
2
Anzahl/
Pcs.
Unterlegscheibe
9
selbstsichernd
Washer
Lock Nut
DIN 6927
A 10,5
DIN 125
Pcs.
4
Anzahl/
Pcs.
Schutzkappe
Plastic Cover
Pcs.
4
2
2

Werbung

loading

Inhaltszusammenfassung für SW-Motech SBL.05.376.100

  • Seite 1 Anzahl/ Pcs. 2 (L/R) Alle vom Motorrad gelösten Schrauben sind gemäß SW-MOTECH products should be installed by a qualified, experienced motorcycle technician. If you are unsure Herstellerangaben wieder zu montieren, oder mit von SW-MOTECH gelieferten Schrauben zu ersetzen. Falls of your ability to properly install a product, please...
  • Seite 2 Montieren Sie Schraube (2) auf der rechten Seite des Motorrades mit original Mutter und Distanzbuchse (4) . Mount screw (2) on the right side with the original nut and Spacer (4) SBL.05.376.100...