Werbung
Quicklinks
1. Included Parts
Downloaded from
www.Manualslib.com
B20
B30
manuals search engine
B20/B30 Installation Instructions
Halyard (Marine & Industrial) Limited
Whaddon Business Park
Southampton Road
Whaddon, SP5 3HF
T: +44 (0)1722 710922
F: +44(0)1722 710975
E: technical@halyard.eu.com
W: www.halyard.eu.com
CV 21 (20 300)
x 6
x 6
x 3
CV 30 (20 400)
x 6
x 2
CV 32 (20 500)
x 6
x 6
x 6
CV 42 (20 600)
x 6
x 6
1(4)
Werbung
Inhaltszusammenfassung für Halyard aquadrive B20
- Seite 1 B20/B30 Installation Instructions Halyard (Marine & Industrial) Limited Whaddon Business Park Southampton Road Whaddon, SP5 3HF T: +44 (0)1722 710922 F: +44(0)1722 710975 E: technical@halyard.eu.com W: www.halyard.eu.com 1. Included Parts CV 21 (20 300) CV 30 (20 400) CV 32 (20 500)
- Seite 2 2. Tools Required 3. Installation 2(4) Downloaded from www.Manualslib.com manuals search engine...
- Seite 3 187 Nm 138 lb.ft > 1 mm (3/64") < 3 mm (1/8") 3(4) Downloaded from www.Manualslib.com manuals search engine...
- Seite 4 B20 42 Nm / 31 lb.ft B30 85 Nm / 62 lb.ft A. Installation B. Removal Thighten screws lightly and align hub. Tighten screws in diametrically opposite Remove the screws and screw them into the releaset hreads of the front ring, sequence in two or three stages up to prescribed settings tabled in these pressing off the rear ring and releasing taper sleeve (fig B).