Intended Use; General Informa�On - CASARIA Vanamo 991043 Bedienungsanleitung

INSTRUCTIONS
6
ATTENTION! Read the safety and assembly instruc�ons carefully, in order to
avoid the risk of injury or damaging the product.
Important: Read these instruc�ons carefully and thoroughly. Keep these
instruc�ons to read through at a later date. If you give the product to
anyone else at some point in the future, please ensure you also pass on this
manual
Only for domestic use and not for
commercial use!
Check the delivery for completeness. Later complaints cannot be accepted.
Check all elements and parts for damages. Despite careful control, products may be
danger your health.
Never modify the product! Changes will void the warranty and the product may
be unsafe or even dangerous.
Unpack all the parts and elements of the set and place the components on the top of
the carton or other clean surface. This protects your new product.
For cleaning use a sponge and warm soapy water.
age the product.

Intended Use

Use the product only for its designed purpose of use. Manufacturer will not assume
cause danger and warranty will be canceled.
General informa�on
We recommend a minimum of 2 persons for the assembly of larger garden furniture.
Dispose of the packaging material in accordance with local regula�ons. Recycling is
®
www.DeubaXXL.de
important!
If you have purchased seat cushions or cushions with this item, please note that the
water-repellent coa�ng is washed out of the fabric during washing. Your local laundry
can advise you on the possibili�es of waterproofing.
Important: Do not stand or sit on tables. Keep small parts out of the reach of children.
When unpacking, be sure to keep plas�c bags and other packaging materials away from
children! Danger of suffoca�on!
Tip for stain removal: Avoid machine washing! First, try to wash out the stain with
lukewarm soapy water. Do not use hard brushes or aggressive cleaning agents that can
damage the water-repellent protec�ve layer of the cushion or support.
Assembly Instruc�ons
- Please note that the screws must first be inserted by hand, and then
slightly �ghtened so that the screw is held in place and the components
are firmly fastened.
Screws must not be �ghtened un�l all parts are connected in this way.
By subsequently �ghtening the screws, small devia�ons in the drill
-
holes or welding points that can occur with hand-made products can be
compensated for.
of a power tool can cause screws to be over�ghtened and thus no longer
hold.
in the screws.
Make sure this product is fully assembled before usage, as shown in the
illustra�on. Ensure that all legs are in contact with the floor and that
your product is securely placed on the floor. Check that all screws and
bolts are �ght and inspect them regularly.
Do not over�ghten the screws, over�ghtened screws can damage the
7
®
www.DeubaXXL.de