PROLED RF MONO CONVERTER Bedienungsanleitung Seite 7

2. Technical Data
Modell
Input Voltage
Output
Power consumption
Ambient temperature
Dimensions
Net-weight
3. Specifications
1. Nearly smooth adjustment of dimming
2. Without need of power supply mounted in standard Ø68 wall box
3. Control of endless number of RF receivers
4. Controlled by single or double push button
IP 20
4. Usage
OFF
COM
Front side
Push button
MBN GmbH, Balthasar-Schaller-Str. 3, 86316 Friedberg - Germany
07.19. Technical amendments reserved
PROLED RF MONO CONVERTER
3 VDC Battery (CR2430)
Radio Frequency Signal 868 MHz
< 1 W
-10°C – 45°C
40 mm x 40 mm x 12 mm (W x L x H)
20 g
ON
Connecting RF MONO CONVERTER with RF receiver:
a. Connect the RF-receiver according to wiring diagram. Receiver is not part
of delivery.
Please order separately.
b. Press learning key (Learning) at receiver.
c. Press one of the buttons at push button connected with RF MONO
CONVERTER. Luminaire connected with RF receiver flash one time
to confirm connection with RF receiver.
d. A longer press (>5 sec.) on learning key untill LED blinks confirms, that ID
will be deleted.
www.proled.com
Bedienungsanleitung / User's manual
40
Back side
Battery: CR2430
Please open battery cover and remove
protective film before first usage.