Before First Use - Soba MM510 Gebrauchsanleitung

MIXER MM510

BEFORE FIRST USE

All parts of the blender must be cleaned thoroughly before using for the first time.
ASSEMBLING THE JAR
1. Place the rubber sealing ring (5) on the inner edge of the blade unit (6).
2. Mount the blade unit with sealing ring on the cup base (7).
3. First place the safety ring (4) over the thread at the bottom of jar, then screw the
assembled base into the bottom of the mixer jar.
The mixer will not work unless the safety ring is mounted properly.
4. Mount the Measuring Cup (1) on the Lid (2).
5. Secure the Lid on the Jar and press down.
MOUNTING THE JAR
1. Make sure that the blender is switched off (Switch to the "0" setting).
2. Mount the jar (9) on to the motor base (8) and press down until engaged
securely.
USING YOUR MIXER
1. Place the food you want to process in the jar.
2. Put the lid on the jar and close securely. Set the measuring cap into the hole in
the lid and turn clockwise to lock.
3. Switch the motor on:
Speed setting
1
2
0
M
• The switch does not engage permanently in the "PULSE" setting. Hold the switch
to the "PULSE" setting or turn it repeatedly to the "M" setting
• Always turn the switch to the "0" setting after using the blender and disconnect
the mains plug.
• To remove the glass jar simply lift it off the motor base. You do not have to rotate
the glass jar to remove it.
All manuals and user guides at all-guides.com
Use to
mix liquids
to mix liquids and solid foods
stop operation
to crush ice crushing & for short, powerful impulse movements
4
INSTRUCTION MANUAL