General Description - Aamgard AX04 Bedienungsanleitung

Downloaded from www.Manualslib.com
151005

1. General Description

For the multi-function lamps of the AX04 series there are several applications in automobile
racing, boot sport and sailing and in industrial environments. The lamps are used as track safety
devices, as pit lane and pit exit signal, as flash light for safety cars, position and signal lamp for
boats and industrial machines or as brake, fog or rain lamp in race cars.
The AX04 lamps excel in high brightness at low power consumption, small over-all dimensions
and low weight. Different mounting variants, light colours and colour combinations provide
suitable solutions for nearly every thinkable application. Additional signal effects can be
generated by the internal blink function or with single segment control e.g. by the mating
external control unit CU11.
The type with complete red LEDs has an FIA homologation for race car rain light applications. A
variant of that has been used e.g. in Lola Formula 3 cars.
2. Mounting + Connections
There are two different mounting alternatives:
Rear side mounting with M4 studs (option -R):
Sideway mounting with M4 screws (option -S):
Connections:
pin1 blue GND / Minus
pin 2 white control wire (to plus / open
pin 3 red Plus LED field 1 (left)
pin 4 yellow Plus LED field 2 (middle)
pin 5 green Plus LED field 3 (right)
manuals search engine
4
ENGLISH
continuously on, to GND
AX04
blinking)