Safety Rules For Laser Lights; Operation - Status Js800 Originalbetriebsanleitung

SAFETY RULES FOR LASER LIGHTS

TOOLS PARTS OVERVIEW & OPERATION
SAFETY RULES FOR LASER LIGHTS
• The laser shall be used and maintained in accordance with the manufacturer's
instructions.
• Never aim the beam at any person or an object other than the work piece.
• The laser beam shall not be deliberately aimed at personnel and shall be prevented
from being directed towards the eye of a person.
• Always ensure the laser beam is aimed at a sturdy work piece without reflective
surfaces i.e. wood or rough coated surfaces are acceptable. Bright shiny reflective sheet
steel or the like is not suitable for laser use as the reflective surface could direct the
beam back at the operator.
• Do not change the laser light assembly with a different type. Repairs must only be
carried out by the laser manufacturer or an authorized agent.
TOOL PARTS OVERVIEW
1. Lock-on button
2. Laser light and working area
illumination on/off switch
3. Laser aperture
4. Jigsaw on/off switch
5. Soft grip handle
6. Shoe plate
7. Shoe bracket
8. Blade guard

OPERATION

SWITCHING ON - SWITCHING OFF
Brief activation
• Switching on: press and hold switch 4.
• Switching off: release switch 4.
Continuous use
• Switching on: press ON/OFF switch 4 and lock it by button 1.
• Switching off: press and release ON/OFF switch 4.
EN
These lasers do not normally present an optical hazard,
although staring at the beam may cause flash blindness.
WARNING: Do not stare directly at the laser beam. A
14
hazard may exist if you deliberately stare into the beam.
9. Blade guide
10. Cutting angle scale
11. Parallel guide
12. Pendulum lever
14. Variable speed control
15. Tool-free blade change control
16. Dust extraction adaptor
17. Parallel guide fixing screw
6