Maximum IRB-100 Benutzerhandbuch Seite 6

Application 2: For Plasma, LCD or thicker TV
For Plasma, LCD or thicker TV, the receiving probe should be
perpendicular to base surface, please follow the steps
Step 1: loosing the cable
Step 2: take the probe upright
Step 3: fix the cable
In this application, when your TV set is thicker model, you can try this
application, bending the IR Receiving probe like the diagram above,
fixing the cable into the cable seizure mechanism. And make sure that
you can see the IR receiving window from the front of TV set.
After you adjust the correct position, please take out the protective cap
of the dual-sided adhesive tape and adhere to the IR Receiving probe,
then take out another protective cap, adhere to the desired suitable
position of TV surface.
Plasma or LCD TV
Adhere on the
bottom of TV
Downloaded from www.Manualslib.com manuals search engine
Visible
5