Changing The Battery Of The Hand-Held Transmitter - Solamagic Externe Dimmbox ARC Montage- Und Gebrauchsanleitung

Checking the programming state
If necessary the following table can be used to identify the relevant programming
state of the wireless receiver in the device. To do so, connect the device as de-
scribed in the ‚installation instructions'.
ARC unprogrammed
Mains connection IR-Röhre wird eingeschaltet
Briefly press any
IR tube is switched on
key
Briefly press any
IR tube is switched to a
key for a second
higher level
time
Changing the battery of the hand-held
transmitter:
Warning: Do not touch the battery directly with the skin.
Open the housing cover. Push the battery out sideways
from the clamped position and remove. Insert the
new battery (plus to the top) and reassemble the unit
in reverse order.
ARC wirelessly programmed
Remains off
If programmed key:
On in the last switching state.
Otherwise no reaction
If programmed key: Switch off.
Otherwise no reaction
82
11/2019