Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1 Clamp adjustment and folding
1.Hold the head clamp
with one hand
°
90
folding
3 Universal adjustable
handle instruction
Universal adjustable handle can be adjusted to any degree suitable to operate in limited space.
Application:
1. Pull the handle apart and rotate to proper position
2.Release the handle to spring back in place
automatically for tightening or loosening.
4 Adjust the clamp
1.Pull up the handle to open the clamp. (see picture 2)
2.Place the frame into the opening of the clamp (it could be the top tube, seat tube and
standing tube) and adjust the hex adjusting shaft to proper position then press down
the handle to hold the frame.
Adjustment:
2-1.Rotate the hex adjusting shaft clockwise to tighten the clamp
properly, making the opening of the clamp smaller. (see picture 3)
2-2.Rotate the hex adjusting shaft counter-clockwise to loosen the clamp
properly, making the opening of the clamp bigger. (see picture 3)
Hex adjusting
shaft
TB-WS20
2.Loosen the knob, pull
it out and then fold the clamp
0
Pull up the handle
Loosen by counter-clockwise
Picture 2
(
)
Home mechanic work stand
Visit operation detail at Super B
Website:
Click Product
2 Tool tray assembly
Knob
0
-360
.
(
°
°
)
°
°
-360
To tighten
Tighten by clockwise
http://www.superbiketool.com/,
Work stand
1.Loosen the quick release lever.
2.Place the tool tray into the 2-ear
collar.
see picture 1
(
)
3.Fasten the quick release lever.
2-ear
hole
collar
(
)
Picture 1
(
To loosen
Universal
adjustable
handle
！
To be sure the
tube is tightened
before work
Picture 3
(
)
Instruction
1.
TB-WS20
hole
(
)
see picture 1
(
)
Quick release lever
loosening
Tool tray
)
02.00.2014.01.00
Werbung
