Mounting - Cube HPA 2000 Bedienungsanleitung

MountIng

MountIng on helMets WIth aIr vents
Use the helmet mount with the velcro strap to attach it to helmets with air vents. Stick
the one-sided adhesive rubber pad on the back of the helmet mount. Use the velcro strap
Helmet mount with
rubber pad
MountIng on helMets WIthout aIr vents (DIrt-/FullFace-helMets)
Helmet mount with
adhesive pad
14
Downloaded from www.Manualslib.com
Velcro strap
Use the helmet mount with the double-sided adhesive pad
to attach it to helmets without air vents. Stick the double-
sided adhesive pad to the bottom of the helmet mount.
When attaching the mount, be sure the adhesive pad is stuck
to a smooth surface. The surface needs to be clean and free
of any grease. Be sure it is securely in place before every
activity.
manuals search engine
to attach the mount to the helmet. If the
straps are too long you can cut them to
the right length. Make sure the mount
is securely attached and check it before
every activity. Use the extension cable
included in the package contents to carry
the battery in a backpack, a cycling jersey
pocket, etc.