Scope Of Delivery - Dometic Switch300 Bedienungsanleitung

SWITCH300
When the negative terminal of the battery is disconnected, all data stored in the volatile memory
will be lost.
• The following data must be set again, depending on the vehicle equipment options:
– radio code
– vehicle clock
– timer
– on-board computer
– seat position
You can find instructions for making these settings in the appropriate operating instructions.
Observe the following instructions when working with electrical parts:
• When testing the voltage in electrical cables, only use a diode test lamp (fig. 1 1, page 2) or a
voltmeter (fig. 1 2, page 2).
Test lamps with an illuminant (fig. 1 3, page 2) consume voltages which are too high and can
damage the vehicle's electronic system.
• When making electrical connections, ensure that
– they are not kinked or twisted
– they do not rub on edges
– they are not laid in sharp edged ducts without protection (fig. 2, page 2).
• Insulate all connections.
• Secure the cables against mechanical wear with cable binders or insulating tape, for example
to existing cables.
3

Scope of delivery

No. in
fig. 3, page 3
1
2
3
4
5
–
EN
Downloaded from www.Manualslib.com
Quan-
Description
tity
1 control box
1 connection cable for vehicle electrics
1 three-stage switch for activating the
camera manually
1 two-stage switch for activating manual
operation
1 connecting cables for control box –
monitor
1 installation material
manuals search engine
Scope of delivery
Ref. no.
9600000067
RV-502-M/M
9