Perel Tools 7500-3N2 Bedienungsanleitung Seite 3

• Keep this device away from dust and extreme temperatures.
• Protect this device from shocks and abuse. Avoid brute force when
operating the device.
• Risk of electroshock during installation.
• There are no user-serviceable parts inside the device. Refer to an
authorised dealer for service and/or spare parts.
• Do not exceed the maximum load.
• Do not puncture batteries or throw them in fire as they may
explode. Do not attempt to recharge non-rechargeable batteries
(alkaline). Dispose of batteries in accordance with local
regulations. Keep batteries away from children.
Refer to the Velleman® Service and Quality Warranty on our
website: http://www.velleman.eu/downloads/files/downloads/
warrantyvellemana401.pdf
3. Operation
1. First install the battery in the remote control [A]: open the
battery compartment and insert a new 12 V battery type A23
following the polarity as indicated in the casing. Close the
compartment.
2. Plug the socket [B] into a suitable mains outlet.
3. Plug an appliance into the socket (max. 2300 W).
4. On the remote control, press the ON button next to the socket
number to switch the socket on.
5. Press the OFF button next to the socket number to switch the
socket off.
4. Technical Specifications
power
voltage
frequency
battery for transmitter
range
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this
manual is subject to change without prior notice.
V. 01 – 26/10/2012
Downloaded from www.Manualslib.com
7500-3N2/7500-3N2-G
max. 2300 W / unit
230 VAC / 50 Hz
433.92 MHz
12 V type A23 (incl.)
max. 30 m (without obstacles)
manuals search engine
3 ©Velleman nv