Control Elements; Power Supply - Gigahertz Solutions FF10 Bedienungsanleitung

FF10

Control Elements

Input jack for antenna cable. Do not
sharply bend antenna cable or overtighten
connector nut!
On/Off Switch (for battery operation only)
ok Power LED: lights up green in the case
of sufficient power supply
For battery operation, the device has an auto power off function. To
re-activate the meter after an automatic shutdown, simply turn the de-
vice off and back on. While connected to the HF-Analyser, e.g. for per-
forming long-term data logging, the auto power off function will be au-
tomatically disabled.

Power Supply

With the HF58B, HF58B-r or HF59B, no addition-
al battery is needed – the FF10 will be powered by
the HF-Analyser. In this case, the battery housing
does not need to be mounted.
With the HFE35C, the filter battery supports the
meter battery. With the HF32D, HF35C, and
HF38B, the filter is exclusively powered by the ex-
tra battery in the external battery housing.
A standard 9V alkaline-manganese or lithium bat-
tery placed in an external battery box can directly
supply the FF10 with power, this way saving ca-
pacity of the meter battery.
Once the "ok" LED has gone off, a valid meas-
urement can no longer be guaranteed. If the filter
LEDs also go off, the meter has been automatically
switched off by the auto power off function.
The auto power off function is automatically disa-
bled if the filter is powered by the HF-Analyser, for
instance in the case of longterm recordings.
© Gigahertz Solutions GmbH
Downloaded from www.Manualslib.com
.English.
manuals search engine
7